Teachlogic Forum 232 Manual do Utilizador descarregar pdf (Página 19)

troubleshooting

System is turned

“on” but there is no

sound

System has power

but no sound

Voice is distorted

and/or signal drop-

out occurs

•Verify AC power; the Blue

LED lights when turned

“on”

•

Check if system has

been unplugged

•

Check circuit breaker

•

Call mainte nance for

assistance

•Turn “on” microphone/

transmitter

•Check for IR transmission,

Signal presence (Orange

LED)

•Check the Green LED in

the sensor

•If sensor LED is not lit

•

Sensor has been

disconnected

•

Power output to sensor

has failed (Receiver/

ampliﬁer needs to be

replaced)

•Check the charge on your

batteries

•Verify that the diodes on

transmitter or sensor are

not being covered

•Obstruction between

transmitter and sensor

15

Problem Solution

contact

If your problem persists

and this guide has not

resolved the issue, call our

customer service depart-

ment for additional assis-

tance. (800) 588-0018

1 2 ... 14 15 16 17 18 19 20 21 22 23 24

Comentários a estes Manuais

Sem comentários